You Can't See But You Can Feel Mac OS

  1. Update:If you're using a 3.3.0 or later kernel, you can skip most of the rest of this page, and instead perform a much simpler operation: Copy an EFI driver for the filesystem you used on /boot (or your root filesystem, if you didn't split off /boot) from the rEFInd package to the drivers subidrectory of the rEFInd installation directory, which is normally /EFI/refind.
  2. Just close the white window where you see all the written stuff and go up to the bar where the apple logo is. Go to “installation” and from there go to either the first or second option (don’t remember which it was) to re-select your Macintosh drive – click on the drive so it is highlighted and then click “restart” so your computer can restart with that drive.
  3. If you want to achieve a true Mac look and feel, you must transfer the minimize/maximize/close buttons to the left side of the window. Of course, this step is optional. If you don’t find that change convenient, you can keep them on the right side.
  1. You Can't See But You Can Feel Mac Os X
  2. You Can't See But You Can Feel Mac Os 11
  3. You Can't See But You Can Feel Mac Os Catalina
  4. You Can't See But You Can Feel Mac Os 7

MacOS Catalina brings plenty of new features and apps to get excited about, but as with all software updates, you can expect some bumps along the way. That shouldn’t come as a surprise, though.

Usually, the internal hard drive for a Mac is the startup disk or boot drive. It not only loads the operating system but also stores data. Therefore, it is frustrating if your Mac doesn't recognize the internal hard drive.

When Mac can't find the internal hard drive, you'll see a folder with Question Mark on Mac startup. Then, your Mac won't turn on at all. Consequently, you can't access important files, like documents, emails, videos, on your Mac. They are facing a high risk of loss.

Don't worry. This article will help you recover data from your internal hard drive. Besides, it also provides 4 feasible solutions for fixing Mac not recognizing the internal hard drive issue.

Recover files from your internal hard drive not recognized by Mac

Note: Any operations you'll do on Mac to fix the unrecognized internal hard drive, may write new data to the drive and overwrite the original one. Hence, data recovery is the priority.

You Can

Hurry up! Watch this video to get an intuitive guide for recovering data from your unbootable Mac.

iBoysoft Mac Data Recovery is the professional and secure Mac data recovery software. It supports recovering data, like videos, documents, photos, emails, from an unbootable Mac (including the T2-secured Mac).

This software is compatible with macOS Big Sur/Catalina/Mojave/High Sierra/Sierra and OS X 10.11/10.10/10.9/10.8/10.7.

You Can't See But You Can Feel Mac Os X

As the Mac is unbootable, you need to run iBoysoft Data Recovery for Mac in macOS Recovery mode. If you don't want to watch the detailed steps, you can watch the video above instead.

Case 1: The internal hard drive is recognized by Disk Utility in macOS Recovery

If your Mac doesn't recognize the internal hard drive or it not being found, macOS Recovery mode can help you do some checks and repairs.

macOS Recovery is part of the built-in recovery system of your Mac. When Mac won't boot, macOS Recovery mode supplies you an entrance to macOS Utilities.

To boot an Intel-based Mac into macOS Recovery mode:

  • 1. Press the power button for seconds to shut down your Mac.
  • 2. Restart the Mac and meanwhile, hold the Command + R keys. Release the keys until you see the Apple logo.

Note: If the above key combinations not working, keep your Mac connected to the Internet. You can hold down Option + Command + R keys when restarting your Mac to enter into Internet Recovery mode. You'll see the spinning globe instead of the Apple logo.

For an M1 Mac, the way to enter macOS Recovery mode on M1 Mac is different.

Under Mac Recovery mode, checking if you can find the hard drive in Disk Utility.

This really matters because if you can see the internal hard drive in Disk Utility, your internal hard drive has no hardware problems. Then, you can try the following solutions to fix the internal hard drive that can't be recognized by Mac.

  • Repair the internal hard drive with First Aid
  • Try to boot Mac in Safe Mode
  • Recover data, erase the internal hard drive, and reinstall macOS
  • Replace the internal hard disk if it's dead

Solution 1: Repair the internal hard drive with First Aid

In macOS Recovery, you can use the First Aid utility to repair certain logical errors on the internal hard drive that may cause it can't be recognized or found.

  • Get to macOS/Mac OS X Utilities, select Disk Utility, and then click Continue.
  • Select the internal hard drive that Mac doesn't recognize, and click First Aid to check and repair errors on this drive. You can also check the volumes on the drive one by one.

Solution 2: Reselect the startup disk in macOS Recovery mode

macOS Recovery mode, the built-in recovery system of your Mac, allows you to reselect the boot volume when your Mac not recognizing the hard drive at first.

  • Click on the Apple logo at the upper left. Then, select Startup Disk.
  • Reselect the correct Mac startup disk that holds a macOS.
  • Click Restart.

Then, wait for moment to check if your Mac can reboot up.

Solution 3: Recover data, erase the internal hard drive, & reinstall macOS

If the internal hard drive is not recognized by your Mac still, then the file system of this internal hard drive could have corrupted.

As the internal hard drive can't be found, is there any other way that you can access the data on this unrecognizable hard disk?

Of course. You can recover lost data from this unrecognizable internal hard disk with iBoysoft Data Recovery Software for Mac. This method is greatly recommended because it is easier and more effective.

After recovering files, it’s time to erase your Mac.

  • Click Disk Utility in macOS Recovery mode.
  • Select the macOS volume and click Erase.

Note: For macOS Catalina / macOS Big Sur, you should right-click the Macintosh HD - Data (or macOS - Data) volume and click 'Delete APFS Volume'. Then, select the Macintosh HD (or macOS) volume and click 'Erase'.

  • Set a name, choose APFS in the Format: box. Then, click Erase.

Do nothing else with your Mac until the erasure process finished.

After your startup disk is erased, carry on reinstalling macOS.

  • Go back to the macOS/Mac OS X Utilities window and choose Reinstall macOS.
  • Follow the onscreen instructions to reinstall macOS.

The macOS reinstallation will cost some time. Then, your internal hard drive could be recognized and your Mac can boot up again. Of course, the internal hard drive will show up on Mac again.

Case 2: The internal hard drive can't be recognized by Disk Utility in macOS Recovery

However, if your Mac can't find the hard drive or not recognizing it even in macOS Recovery mode, you won't find the Mac hard drive in Disk Utility. This internal hard drive might have some hardware problems.

The only way is to send it to a local repair store. Since the internal hard drive that can't be recognized by the Mac has hardware issues, you can't recover data from it. Therefore, backing up your Mac at regular intervals is very necessary.

Conclusion

When your Mac doesn't recognize the internal hard drive, you can't access your Mac. At that time, all data on your Mac has a high risk of loss. Hurry up to recover files from your Mac with iBoysoft Mac Recovery software. And then, try the solutions mentioned in this post to fix your Mac.

Swing's MacOS L&F
It's Slimmer, Faster, and More Powerful

There's something for everyone in Swing 1.1 (now part of the JDK 1.2 core). For example, if you're an Apple Macintosh developer, you may be glad to hear there's a fully operational Macintosh look-and-feel implementation for Swing.

Swing's MacOS L&F was originally introduced in an early-access version available for download from the Java Developer Connection. Now, when you download Swing 1.1 using a Macintosh, you automatically get the new Swing MacOS package.

Swing's MacOS look and feel is designed to work only on Macintosh computers, in the same way that Swing's Windows L&F is intended to work only on computers running Windows. Because the MacOS Look and Feel runs only on MacOS systems, its archive is stored in a Macintosh format -- a stuffed-binhexed format that Stuffit Expander can open. The archive contains a mac.jar file and complete source code. For more details on this topic, see the item headed 'If it looks like a Mac and feels like a Mac' in the 911 column.

The Swing team encourages Mac developers to experiment with the new MacOS L&F and then to comment on it by sending e-mail to
swing-feedback@java.sun.com.

The Mac L&F introduced with Swing 1.1 Beta is a complete rewrite of an earlier Mac L&F that was provided with Versions 1.0 through 1.0.2 of Swing.

'The previous version suffered from some performance issues, and when the Swing plaf layer was overhauled, it was decided it would be easier to start from scratch,' explained Swing team member Steve Wilson, who helped develop the new Mac L&F. Early indications indicate that the new Mac look and feel is smaller, faster, and more robust than its predecessor, he added.

You Can't See But You Can Feel Mac Os 11

The following screen shot shows what the new Mac L&F looks like when it is displayed on a Macintosh computer:

You can obtain the new Swing look and feel by downloading it from the Java Software Developer Connection Web site, which is at
http://java.sun.com/jdc
To use the new Mac L&F, you'll need Version 1.1 Beta of Swing, which you can download from the same site. Also, you must add mac.jar to your classpath. Then add the following lines of code to your Swing-based application:


try {
UIManager.setLookAndFeel
('com.sun.java.swing.plaf.mac.MacLookAndFeel');
} catch ( Exception e ) {
System.out.println ('Couldn't load Mac L&F' + e);
}

The Mac L&F and Apple's MRJ

Swing's new Mac look and feel has been tested with Macintosh OS Runtime for Java (MRJ), and with an early access release of MRJ 2.1. MRJ, implemented as a set of shared libraries and other system software files, lets users run Java applets and applications on PowerPC and 68040 computers running Mac OS 8.0 or later.

MRJ supports all the new Java features introduced in version 1.1 of Sun's core Java specification, including JavaBeans, internationalization, security and signed applets, the JAR file format, the Java math package, remote method invocation (RMI), object serialization, reflection, Java Database Connectivity (JDBC), inner classes, and the Java Native Interface (JNI).

You can download MRJ and the MRJ SDK from
http://www.apple.com/macos/java

You Can't See But You Can Feel Mac Os Catalina

Wanted: Your feedback

When you've tried out Swing's new Mac L&F, be sure to send your comments and suggestions to

You Can't See But You Can Feel Mac Os 7

swing-feedback@java.sun.com